None

Pulpax product consists of natural mica coated with polyurethane paints and colored natural stone powder in sizes of 1 to 5 mm and a thickness of about 200 to 500 microns with water-based and environmentally friendly acrylic resins (most materials are German). ) And mixed with high adhesion and permeability on the bottom surface, after applying the product on preferably soft cement and drying, they will be 100% washable. This product, which is exactly similar to pulping, has only a finer texture, and among its differences or advantages, we can mention a higher coverage than pulping, and also micropulp has the ability to run with rollers and rollers. Product Description Pulpex In cases and areas where sunlight is very hot, direct and destructive, it is better to use pure acrylic resins that have a higher UV resistance. Ready-to-apply materials (option 1) should only be mixed with a suitable mixer and applied with a Knittex spray gun with an 8 mm nozzle hole with the help of an air compressor on the surface as a liner and surface. Concentrated material (option 2) must first be diluted with German talus powder that is sent with the product to the formula that for every 10 liters of water, 100 grams of talcum powder is added to the water and mixed from one day before work and then From the so-called opening of the talus, about 5 to 8 liters of pre-prepared talus water are added to the ingredients and mixed thoroughly per 65 kg barrel. The material should be stored and applied at a temperature above 5 degrees. If the material is frozen inside the container or on the wall before drying, the resin will lose its properties and colored mica will fall. The substrate of the material should be clean and free of dust, and in the case of old structures with a dirty surface, the surface should be washed with water jet, and it is better to use a primer for the substructure. Unlike pulping, which is quite glossy, pulp text It is semi-gloss but has high UV resistance. Advantages of Pulpx 1) Simulation of expensive granite stones with high abrasion resistance and infinite color variation 2) Integrated and waterproof coating 3) UV resistant to untiuv sun 4) High execution speed 5) Very high thermal resistance due to the presence of stone Natural mica (melting point of mica above 1200 ° C) 6) Low weight and reasonable price compared to stone 7) Antibacterial 8) Covering small cracks under the work.